Sanyo Universal Remote Codes & Program Instructions

This blog post says about the sanyo tv codes, if you’re using the sanyo tv device then you can find all types of remote codes from below mentioned list and you can program your device with your favorite remote whatever the brand you use. but mostly 049 code will work for Sanyo tv if this not working then try below universal codes.

First of all we are going to provide the tons of sanyo universal remote codes in the below list and then you can use any of below three methods to program your universal remote with the Sanyo TV.

Useful Links:

Sanyo blu ray remote codes

Sanyo soundbar fwsb426f remote code

Sanyo DVD dvd player remote code

Sanyo Universal Remote 4 Digit Codes

0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180

Sanyo Tv Universal Remote 3 Digit Codes

054, 069, 023, 025, 004, 013, 049, 108, 110, 180, 209

RCA Universal Remote Codes For Sanyo

1004 , 1048 , 1049 , 1073 , 1080 , 1107 , 1162 , 1169 , 1180 , 1196

Philips Universal Remote Codes For Sanyo

0506, 0311, 0612, 0002, 0428, 0802, 0412, 0619

Magnavox Universal Remote Codes For Sanyo TV

0035, 0039

Sanyo TV Universal Codes for Sony Remote

330, 335

Sanyo TV Universal Codes for Comcast xfinity remote

10154, 10159

Sanyo TV Universal Codes for Cox remote

0054, 0154, 0088, 0799, 1142

SANYO TV Universal Codes for One for All Remote & GE

0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180

SANYO TV Codes for DirecTV Remote

10154, 10088, 10107, 10146, 10159, 10232, 10484, 10799, 10893, 11142, 10208, 10339

How to Program Sanyo Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Sanyo Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Sanyo universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Sanyo Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

With the above three methods we can easily Program Our Sanyo TV Device Universal Remote.

Conclusion:

We hope you have got the perfect universal remote codes for your favorite Sanyo TV device and then you have programed with your sanyo tv. If you’re getting any interruptions while trying to access your tv with this remote.

Leave your feedback in the below comment section and we feel happy when you share this article with your friends and also all of your familiars who have been waiting for this type of blog post.

Leave a Comment