Emerson Universal Remote Codes & Program Instructions

For Emerson device also we can get the Universal Remote in various brands and the codes for this emerson device have been mentioned in the below list you can find the emerson universal remote codes from that list.

If you find any of those codes doesn’t work to program your emerson device you need to use another code and you need to repeat this process until your device has been programmed with the universal remote and the methods to program your device with remote control has mentioned below.

Emerson TV 2 Digit Remote Codes:
01, 03, 04, 23, 32, 34, 35, 77, 83, 84

Emerson TV 4 Digit Remote Codes:

0004, 0009, 0044, 0135, 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0227, 0233, 0250, 0252, 0254, 0257, 0265, 0266, 0310, 0325, 0456, 0040, 0041, 0042, 0021, 0023, 0024, 0179, 0045, 0025, 0027, 0030, 0032, 0034, 0035, 0037

If above codes not work then try below ones

0181, 0198, 0205, 0207, 0263, 0490, 0650, 3005, 3008, 3010, 3011, 3012, 3013, 3015, 3025, 3031, 3186, 3203, 3204, 3218

1) Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Emerson Device Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

3) Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

With the above three methods we can easily Program Our Emerson Device Universal Remote.

Let us know with what code your device have been programmed with your favorite universal remote brand. If you didn’t find any code for your remote let us know through the comment section we will update it as soon as possible.

Speak Your Mind

*