Philips Universal Remote Codes & Program Instructions

If you own many devices, you can control all of them using the Philips Universal Remote. The article below will guide all throughout the programming process using philips remote codes can collect from this list and from below table simply look for your TV or any device brand name then pick the code and start following programing guide which is provided below of the philips remote codes table list.

Philips Universal Remote Codes List

Useful Links:

RCA Universal Remote Codes For Philips

1003, 1004, 1008, 1012, 1019, 1062, 1068, 1069, 1075, 1086, 1087, 1088, 1130, 1132, 1134, 1167, 1183, 1196, 1219, 1235, 1268, 1273, 1291, 1292, 1370, 1377, 1382, 1386, 1390, 1407, 1426, 1434

GE & One-For-All Universal Remote Codes For Philips

0062, 0204, 0184, 0208, 0205, 0206, 0207, 0004, 0189, 0183, 0199, 0200, 0288, 0456, 0003, 0008, 0068, 0075, 0086, 0087, 0141

Magnavox Universal Remote Codes For Philips

0005, 0006, 0007, 0008, 0009

How to Program Philips Universal Remote Without Codes

In the auto search method, all the huayu universal remote code for pensonic are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Philips Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Philips universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Philips Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

Final Words:

Before your start programming the Philips universal remote codes, make sure that the deice you wish the remote to control is properly switched on. Now that you have programmed your remote, you can now enjoy using a single remote to control multiple devices.

Leave a Comment