Westinghouse Universal Remote Codes & Program Instructions

Have you purchased the universal remote for your Westinghouse tv and are you confusing to program your tv remote with your favorite Universal remote control then you should have the codes, those codes mentioned in the below list.

Check them now and program your device remote with your favorite universal remote and then watch your favorite tv show’s and also any other program by simply operating with this universal remote.

Westinghouse Universal Remote Codes For Vizio TV

  • 0143
  • 0002
  • 0114
  • 1146

GE Universal Remote Codes For Westinghouse TV

  • 0143
  • 0114

RCA Universal Remote Codes For Westinghouse TV

11282, 13382, 2293, 0885, 12397, 1712, 3470, 10451, 10885, 1036, 11217, 0451, 11300, 0463, 10889, 11712, 13094, 072, 1577, 2397, 1217, 13470, 1282, 12293, 10463, 13579, 0890, 3094, 13949, 13559, 3382, 3559, 13899, 11577, 0889

Magnavox Universal Remote Codes For Westinghouse TV

  • 0127
  • 0112
  • 0049
  • 0046

Philips Universal Remote Codes For Westinghouse TV

0915, 0013

First try these Westinghouse codes

0027, 0478, 0912, 0916

Westinghouse Universal 4 Digit Remote Codes

4797, 3411, 1300, 1712, 0143, 0114, 1146, 3241, 3251, 0111, 1901, 2281, 3711, 3851, 5781, 5971, 5981, 1891, 2141, 0885, 0889, 0890, 1282, 1577, 0451, 1217, 1019, 1027, 1195, 1196, 1336, 1414, 1430, 1433, 1367, 1489, 1454, 0002, 0915, 0013, 1216, 5001, 5054, 5115, 5117, 5237, 5379, 1036

Westinghouse Universal 3 Digit Remote Codes

795, 528, 500, 553, 562, 505, 738, 574, 798, 809, 531, 551, 516, 794, 513, 652, 575, 766, 697, 003, 797, 068, 097, 107, 856, 072

Westinghouse Universal 5 Digit Remote Codes

11712, 13579, 13382, 10885, 11300, 13949, 12293, 13094, 13470, 10890, 11282, 12397, 13908, 10451, 10463, 11217, 10000, 10889, 11577, 12499, 12195, 17133, 19016, 18535, 11106, 12824, 12438, 12536

How To Program Westinghouse TV Universal Remote?

  • From your tv remote Press and Hold “Mute & Select” options simultaneously until “Two Blinks”
  • Now Enter “9,9,1” code and wait for “Two Blinks”
  • Now “Enter 1”
  • Then press and release “Volume +” button
  • Point the remote “before the tv” and keep on pressing and releasing the “CH +” key, whenever the volume changes
  • Now “Press the Select” option to lock the code.

How to Program Westinghouse Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Westinghouse Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Westinghouse Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Westinghouse Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

Speak Your Mind

*