Keyin rm-133e Universal Remote Codes & Program Instructions

Keyin rm-133e Universal Remote Codes are pretty much similar for every device either it could be a samsung, sanyo, hitachi, astron, JVC tv…etc, now from this blog post we are going to provide you some of the working universal remote control codes for your various devices whatever the device you use.

Just simply select the following codes and enter them by using the keyin rm-133e remote control. So lets get into the codes list below, if you couldn’t find proper codes then use the below methods to find them out.

Keyin rm-133e Universal Remote 3 Digit Codes

002, 006, 071, 128

Check Out: sony dvd player remote codes for tv

Keyin rm-133e Universal Remote 4 Digit Codes

0029, 0022, 0286, 0280, 0379 , 0380, 0456, 0604, 0637, 0079, 0104, 0107, 0110, 0166

Also Check: lg universal remote codes list

How To Program Keyin rm-133e Universal Remote?

1) Keycode

By using the keycode we can easily program a Keyin rm-133e universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Keyin rm-133e Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Keyin rm-133e Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Keyin rm-133e universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your Keyin rm-133e and also for your favorite remote control. Those methods are used for Keyin rm-133e remote control setup.


If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site.


Speak Your Mind