Have you brought a new universal remote control for your Funai TV and don’t you have knowledge about the remote codes then here is the best guide to program your tv with the universal remote control by using some codes such as three digit codes, four digit codes and also five digit codes too.
We have all types of codes to program remote control and tv together, you can try the remote codes from the below mentioned list according the given methods. Suppose one code doesn’t work for you then try with another codes, so keep on trying until your remote control get programed with your tv.
- 0.1 Funai TV Universal Remote 4 Digit Codes List
- 0.2 Funai TV Universal Remote 5 Digit Codes List
- 0.3 Funai TV Universal Remote 3 Digit Codes List
- 1 How to Program Funai TV Universal Remote With Auto Search
- 2 How to Program Funai TV Universal Remote With Manual Method
- 3 How to Program Funai TV Universal Remote With Code Search
Funai TV Universal Remote 4 Digit Codes List
Funai TV Universal Remote 5 Digit Codes List
Funai TV Universal Remote 3 Digit Codes List
RCA Universal Remote Codes For Funai TV
1038, 1046, 1047, 1189
GE & One-For-All Universal Remote Codes For Funai TV
0051, 0189, 0053, 0227, 0456, 0042
Philips Universal Remote Codes For Funai TV
0706, 0520, 0906, 0324, 0247, 0805
Magnavox Universal Remote Codes For Funai TV
GE Universal Remote Codes For Funai DVD Player
0051, 0189, 0053, 0227, 0456, 0042
How to Program Funai TV Universal Remote With Auto Search
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Funai TV Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Funai TV universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Funai TV Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
We hope the above methods and the codes have been worked to program your Funai tv and also for your favorite remote control. Those methods are used for Funai remote control setup.
If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site. Or do you need other remote codes then feel free to ask us through the below comment section and we will provide those codes for you.