Universal Remote Codes For Video Projectors

Are you a user of the video projector ? are you one of the aspirer of an universal remote codes? then why late this is the best pltform to find out any type of universal remote control codes for video projectors. We have mentioned most usable projectors. If you want to get the codes then check them below.

You can even use an app which is known as universal projector remote app. It almost has 900,000 devices able to remotely control including all branded types video projectors.

Universal Remote Codes For Video Projectors List

Brand NameVideo Projectors Codes
ACER1231, 4344
ASK1213, 1232
BENQ1132, 4411
BOXLIGHT1211, 1224, 1333, 1411, 2123, 2124
DBPOWER1242, 2241, 2441, 4234
DELL1134, 4232, 4233
DUKANE1122, 1411, 1413, 2242, 2341, 3324, 3414
EPSON1111, 1233, 2131, 2132, 2331, 2332, 3132, 3133
ERISAN1333, 1411, 2123, 2124
EXCELVAN1211, 1224, 1333, 1411, 2123, 2124
FUGETEK1132, 4411
HITACHI1122, 1234, 1411, 1412, 1413, 2133, 2233, 3324, 3331, 3414, 4114, 4121, 4122
INFOCUS1121, 1213, 1313
JVC1142, 1241, 1414, 2144, 2234, 4133, 4134
LG1242, 2241, 2441, 4234
MITSUBISHI1143, 1144
OPTOMA1112, 1344, 4414
PANASONIC1114, 1243, 1321, 1331, 2113, 2114, 3312, 3313, 3411, 3412, 3413, 3434, 4112, 4113, 4341
RIENAR1313, 1324, 1433, 4312, 4313
SAMSUNG1131, 2112, 2314, 3223, 3224, 4144, 4211
SANYO1214, 1224, 1244, 1322, 1421, 1422, 2123, 2124, 2142, 3423, 4241, 4242
SHARP1311, 1323, 1443, 1444, 2111, 2213, 2214, 3443, 3444, 4111, 4124, 4131
SMART1341, 1342, 1343
SONY1113, 1312, 1424, 3332, 3333, 4212
TOSHIBA1221, 1313, 1324, 1433, 4312, 4313
TRONFY1341, 1342, 1343
VIEWSONIC1122, 1411, 1413, 2341, 3324, 3414, 3421
YAMAHA1222, 1314, 1442, 4224, 4324

How to Program Video Projectors Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Video Projectors Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Video Projectors Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Video Projectors Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.


In this blog post we have mentioned each and every Universal Remote Codes for Video Projectors, still if you have any issues about the above universal remote codes or if we skipped to mention some codes then leave a comment we will rectify the faults and also we will mention those Video Projectors remote codes.

Speak Your Mind