Logik DVD Player Universal Remote Codes

Are you tired of using a lot of remote to control each device which sometimes ended up picking the wrong one? Eliminate the hurdle of using numerous remotes and allow the wonders of Logik DVD  player remote to take control. This is one of the most powerful and reliable brands of universal remote you can grab in the market nowadays. We have the complete selection of universal Logik DVD remote codes which when programmed to your device will definitely work out well. Once you have matched the code to your device’s brand and model, it would be easier to program Logik DVD remote.

Logik DVD Universal Remote Codes List

We collect all types of Logik DVD remote codes from which you can try and start with the programming method. With so many Logik universal remote codes, you might find it very confusing to select the right one for your type of device. Keep trying the code each time you fail because with the complete list of Logik DVD universal remote codes that we share here, there will be the perfect one for your device.

Find the right code for your device from the list below:

  • 2304
  • 0713
  • 3681
  • 2382
  • 3805
  • 3177
  • 3542
  • 0884
  • 2195
  • 1832
  • 2644
  • 2594
  • 2439

Check Out: logik soundbar universal remote codes

How to Program Logik DVD Universal Remote

When you decide to operate a number of devices with a single Logik DVD remote, you are making the right choice. To program Logik DVD remote might sound a little challenging but it works the other way around. This process only requires simple steps and with the help of universal Logik DVD remote. Follow the steps below when programming your Logik DVD remote:

How to Program Logik DVD Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Logik DVD Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Logik DVD universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Logik DVD Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.


Using the Logik DVD remote to control several devices will offer a great convenience. What is your experience in programming your device? Is this article with the codes and instructions provided been a help? Share your experience with us by leaving us a message. Your feedbacks matter to us in improving this site. Or should you want to share a few codes which are not listed above, feel free to message here.

Leave a Comment