Sylvania Universal Remote Codes & Program Instructions

Do you know how to program a universal remote control? if you do not know how to program then come with us we will give you the access to for so many queries which are rotating in your mind about the universal remote codes and programing methods like how to program a universal remote to a sylvania tv? also how to program magnavox remote to my sylvania tv?..etc

If you really want the procedure and the working codes then follow the below methods and also check the codes too. They will help you a lot.

Sylvania TV Universal Remote Codes 4 Digit

0002, 5309, 1132, 1196, 1886, 5001, 1334, 1165, 5014, 0030, 0068, 0321, 0054, 1060, 1279, 0807, 0171, 1134, 0502, 5205, 1665, 1059, 1056, 5285, 1006, 1051, 1059, 1483, 0096, 0701, 0919, 1102, 1199, 0008, 5018, 5151, 1082, 1074, 5155, 1128, 1028

Sylvania TV Universal Remote Codes 3 Digit

456, 068, 030, 598, 160, 559, 074, 035, 353, 164, 006, 060, 699, 668, 666, 196, 723, 621, 632, 020, 007, 027, 011, 712, 004, 353, 621, 127, 694, 134, 019, 173, 010, 699, 567

Magnavox Universal Remote Codes For Sylvania TV

0034, 0081, 0023, 0018, 0078, 0067, 0079, 0020, 0048, 0080, 0041, 0051, 0072, 0057

Philips Universal Remote Codes For Sylvania TV

0919, 0717, 0502, 0520, 0715, 0402, 0807, 0002, 0247, 0408, 0324, 0115, 0109

RCA Universal Remote Codes For Sylvania TV

1004, 1006, 1008, 1019, 1062, 1068, 1069, 1075, 1076, 1077, 1088, 1116, 1130, 1132, 1134, 1161, 1183, 1189, 1196, 1353

GE & One-For-All Universal Remote Codes For Sylvania TV

0004, 0141, 0068, 0008, 0075, 0009, 0227, 0135, 0189, 0062, 0456, 0183, 0161

Sylvania TV Universal Remote Codes 5 Digit

11864, 11886, 11394, 10171, 11963, 11665, 11314, 10054, 10030, 10020, 10028, 10065, 10096, 10587, 11271, 11931, 11944, 11913, 10381, 10187, 10024, 10005, 13700, 17000, 12210, 19617, 13229, 19601, 17342, 17646, 13207, 19307, 10217, 13811, 18016, 18212, 17627, 17032, 12248, 12258, 12270, 12284

How to Program Sylvania Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Sylvania Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Sylvania universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Sylvania Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your Sylvania tv and also for your favorite remote control. Those methods are used for Sylvania tv remote control setup.

Conclusion:

If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site.

Speak Your Mind

*