Devant TV’s Universal Remote Codes & Program Instructions

To use any of your favorite universal remote for your devant tv, you need to program with the universal remote codes. The codes have mentioned in the below lines and you can enter those codes in your device as per the below mentioned steps. So try those codes such as two digit codes, three, four and also five digit codes can be work for all brands like cybertec rm-l1107+3, chunglap, huayu, keyin etc..

Try the codes one by one and get your universal remote programed with your tv.

Devant TV’s Universal Remote 3 Digit Codes List

  • 024
  • 023

Devant TV’s Universal Remote 4 Digit Codes List

0102, 0134, 0193, 0195, 0196, 0214, 0231, 0338, 0349, 0355, 0384, 0416, 0456, 0457, 0460, 0472, 0476, 0477, 0509, 0526

Devant TV’s Universal Remote 5 Digit Codes List

  •  00001
  • 00002

GE & Philips Universal Remote Codes For Devant TV

  • 6211

How to Program Devant TV Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Devant TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Devant TV universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Devant TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your Devant tv and also for your favorite remote control.

Conclusion:

If your device still not programed with the universal remote control, then feel free to ask us your issue as a query and our experts will solve it as soon as possible, thank you for visiting our blog, keep visiting our official site to get updates every time we post new articles.

Speak Your Mind

*