Mitsubishi Universal Remote Codes & Program Instructions

Mitsubishi universal remote codes have most working codes and they are used for many devices too. if you want to use the Mitsubishi remote codes then you need to check the below lines and there you can get the different codes like two digit, three digit and four digit codes too, so try them once and get programed with your favorite tv.

Check the codes below and try them for your tv by using the methods you can easily program this universal remote codes. So try them now.

RCA Universal Remote Codes For Mitsubishi TV

  • 1004
  • 1005
  • 1006
  • 1019
  • 1022
  • 1051
  • 1064
  • 1079
  • 1080
  • 1081
  • 1082
  • 1125
  • 1135
  • 1196

Philips Universal remote Codes For Mitsubishi TV

0102, 0716, 0706, 0002, 0502, 0027, 0803, 0715, 0619

GE & One-For-All Universal Remote Codes For Mitsubishi TV

0005, 0151, 0051, 0004, 0009, 0254, 0022, 0141, 0180

Magnavox Universal Remote Codes For Mitsubishi TV

0017, 0033, 0036, 0042, 0060

Mitsubishi TV Remote Codes Comcast

11250, 10093, 10150, 10178, 10014, 10019, 10098, 10155, 10331, 10358, 10592, 10836, 10868, 11278, 11392, 12268, 12284, 0093, 0150, 0178, 10036, 11797

Mitsubishi Universal Remote 4 Digit Codes List

  • 0178
  • 0150
  • 0093
  • 0019

Mitsubishi Universal Remote Codes 3 Digit Codes List

504, 572, 505, 623, 570, 653, 654, 542, 656, 725, 787, 613, 799, 517, 521, 564, 614, 225, 627, 718, 597, 540, 652, 728, 051, 058, 134, 150, 571, 695, 004, 005, 009, 022, 046, 081, 089, 132, 133, 141, 151, 180, 254, 006, 019, 079, 080, 082, 125, 064, 135, 196, 098, 155, 178, 241, 014, 036, 037, 011, 027, 041, 055, 056, 061, 068, 077, 094, 095

Mitsubishi Universal Remote Codes 5 Digit Codes List

11250, 10093, 10150, 10178, 10014, 10019, 10098, 10155, 10331, 10358, 10592, 10836, 10868, 11278, 11392, 10036, 11522, 11797, 11917, 12732, 10005, 12501, 12210, 18114, 17111, 15817, 18016, 19215, 17029, 12268, 12284

How to Program Mitsubishi Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Mitsubishi Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Mitsubishi universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • ¬†Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Mitsubishi Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your mitsubishi tv and also for your favorite remote control.

Conclusion:

Get the instant reply with our expert team, if you have any queries about any types of universal remote codes and also any type of universal remote controls. We feel happy to help you, so feel free to ask any queries regarding to the codes.

Comments

  1. Robert N Casselberry says

    Trying to find a Mitsubishi 29OP175020 remote replacement OR one that works with our TV

Speak Your Mind

*