Logitech Harmony 650 Universal Remote Program Instructions

If you can able to download a software from the logitech official website then you can easily add codes to your logitech remote by the remote control application from this logitech. Basically, these codes can be generated in the collaboration between beyond the platinum and also logitech. You just need to visit “setup.myharmony.com” and then setup your remote by using the database. Simple!

If you would want to get more guidance on this logitech harmony 650 universal remote then see below.

How To Setup Logitech Harmony 650 Remote

There simple steps to set your harmony remote up and then you can use it as easily as you can. The remote will be under your control after the below steps.

  1. Chose “Add Device”
  2. Then select “satellite” which lies under “Devices”
  3. After that chose “beyond platinum” which lies under “manufacturer”
  4. Finally, you need to type the words “Explora MODE1” or “Explora MODE2” under the “Model”
  5. You can test the remote now and it is working now.

More Methods To Program Logitech Harmony 650 Remote

How to Program Logitech Harmony 650 Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your Logitech Harmony 650 Remote Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Logitech Harmony 650 Remote Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Logitech Harmony 650 Remote Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

Conclusion:

If you need any assistance from us regarding to any kind of universal remote codes then please contact us and we will give a better suggestion and resolve your issue as soon as possible. Keep visiting to get more update universal remote codes.

Speak Your Mind

*