Jumbo Universal Remote Codes & Program Instructions

If you would want to get the jumbo universal remote codes then you need to program the remote and then you can easily use this remote with your tv. If you do not know how to program your remote to work with your TV then you need to follow the methods which are mentioned below. Try the methods one by one, definitely you will find a working method and then you can easily enter the codes to be connected with your tv and this universal remote control.

If you would like to get the remote codes list first then you can check them below otherwise you can skip the table and find the programing procedures below.

Jumbo Universal Remote Codes List

Brand NameRemote Code
ADMIRAL TV001, 173
AIWA TV195, 196
AKAI TV002
AOC TV009, 014, 132, 156, 175
APEX TV214
AUDIOVOX TV053
CITIZEN TV009, 042, 053, 058, 105, 109, 177
CRAIG TV042, 053
DAEWOO TV018, 019, 042, 058, 082, 085, 097, 100, 126, 127, 130, 138
EMERSON TV035, 036, 037, 038, 039, 040, 041, 042, 043, 045, 049, 051, 053
FUJITSU TV051, 197
FUNAI TV042, 051, 053, 155, 189, 198
GE TV015, 022, 031, 044, 052, 054, 055, 087, 092, 103, 107, 125, 164
HITACHI TV001, 004, 009, 013, 059, 060, 061, 088, 091, 137, 139, 140, 141, 142, 143, 144
HAIER TV216, 217
JENSEN TV004, 009
JVC TV013, 054, 055, 060, 065, 067, 089
LG TV044, 005, 009, 056, 057, 155, 156, 172
MAGNAVOX TV004, 008, 009, 062, 068, 069, 074, 075, 077, 089
MEMOREX TV000, 001, 004, 009, 049, 051, 135
MITSUBISHI TV004, 005, 009, 022, 051, 081, 089, 132, 180
NEC TV003, 004, 005, 009, 010, 085, 089, 095
PANASONIC TV 003, 051, 055, 062, 070, 148, 170, 171
PHILIPS TV062, 068, 069, 074, 075, 077, 086, 087, 089, 163, 183
PIONEER TV004, 009, 090, 179, 185
PROSCAN TV000, 015, 031, 107
QUASAR TV003, 054, 055, 062, 070, 148, 170, 171
RCA TV007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113
SAMSUNG TV004, 005, 009, 015, 104, 105, 106, 109, 172
SANSUI TV135, 136
SANYO TV004, 013, 049, 108, 110, 180, 209
SHARP TV004, 009, 079, 095, 111, 112, 114, 122, 123, 124, 173
SONY TV002, 006, 071, 128
SYLVANIA TV004, 008, 009, 062, 068, 069, 074, 075, 077, 155, 161, 163, 189, 198
TOSHIBA TV013, 049, 089, 105, 109, 117, 118, 120, 159, 178
ZENITH TV000, 001, 004, 023, 038, 058, 059, 064, 073, 121, 135, 136

How to Program Jumbo Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Jumbo Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Jumbo Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Jumbo Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

Conclusion:

In this blog post we have mentioned each and every Universal Remote Codes for Jumbo, still if you have any issues about the above universal remote codes or if we skipped to mention some codes then leave a comment we will rectify the faults and also we will mention those Jumbo remote codes.

Speak Your Mind

*