Kogan TV Universal Remote Codes & Program Instructions

We are mentioning each and every type of universal remote control codes such as Kogan TV remote code directv, GE universal remote …and so on, if you are searching for these type  and any other type of remote codes to program with your Kogan TV then this is the best platform to connect it with your tv.

In this blog post we are mentioning all types of codes and also the methods to program, then why late just check the codes and apply them as per the below mentioned methods.

Kogan TV Universal Remote 4 Digit Codes

  • 3505
  • 0382
  • 0339
  • 7890
  • 0418
  • 0641
  • 0714
  • 0726
  • 0754
  • 0779
  • 0816
  • 1190
  • 2267
  • 1404
  • 0037
  • 0587
  • 0371
  • 0218

Kogan TV Universal Remote 5 Digit Codes

  • 35232

How to Program Kogan TV Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Kogan TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Kogan TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Kogan TV Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

We hope the above methods and the codes have been worked to program your Kogan tv and also for your favorite remote control. Those methods are used for Kogan TV remote control setup.

Conclusion:

If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site.

Speak Your Mind

*