Cybertec Universal Remote Codes & Program Instructions

Cybertec users have been using the universal remote controls to operate their device with remotes like rm-8in1, rm-l1107+3 and other remotes. If you are trying to find universal remote codes then you have approached the perfect blog and here you can get all types of working codes and you can program to your tv with your favorite remote control.

First of all we are going to mention the codes and then we will be giving the perfect methods to program with your universal remote.

Cybertec Universal Remote 3 Digit Codes List

092, 018, 063, 099, 023, 008, 011, 018, 021, 024, 025, 033, 037, 039, 040, 049, 050, 051, 091, 113, 123, 375, 378

Cybertec Universal Remote 4 Digit Codes List

0094, 0154, 0170, 0190

How To Program Cybertec TV Universal Remote?

There are three different methods to operate any universal remote control by programing with your tv, if you program with working codes by using the below methods then your tv will be working fine! so let us have a look at the methods if you have the codes from the above list of codes.

1) Keycode

By using the keycode we can easily program a cybertec universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “cybertec TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal cybertec Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your cybertec universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your cybertec tv and also for your favorite remote control. Those methods are used for cybertec remote control setup.

Conclusion:

If you found any of the above codes didn’t work for your device then try to enter the alternative codes which are mentioned above and still you face the same issue then leave a comment below about your issue and we will try to solve that issue and also provide you a best solution.

Speak Your Mind

*