Jensen TV Universal Remote Codes & Program Instructions

by

Are you looking forward for the jensen universal remote so to operate jensen tv we have various universal remote controls such as ge universal remote, directv..etc we need to enter different jensen tv universal remote codes in our favorite remote to start working with this jensen tv. If you would like to be programed with your favorite remote and tv then follow the below methods by using the codes which we mentioned below.

Jensen TV Universal Remote 4 Digit Codes

  • 0004
  • 0009
  • 0133

Jensen TV Universal Remote 3 Digit Codes

  • 004
  • 009

Jensen TV Universal Remote  5 Digit Codes

11326, 13204, 10761, 11299, 10050, 10817, 11933, 10815, 12541, 10005, 12210, 12726, 12284

RCA Universal Remote Codes For Jensen TV

  • 1004
  • 1006
  • 1196

GE & One-For-All Universal Remote Codes For Jensen TV

0004, 0009, 0133

Philips Universal Remote Codes For Jensen TV

0002, 0502, 0914

How To Program Jensen TV Universal Remote?

The below mentioned methods will be varying according the universal remote control which you are trying to operate for your tv, so change the methods and also change the codes too, whenever your remote and tv seems to be not syncing with the codes. So let us start the programing now.

We have mentioned an alternative method to search for your codes in your remote control such as ge universal remote codes for jensen tv, jensen universal remote codes jer 422, jensen tv codes directv…etc

How to Program Jensen TV Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Jensen TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Jensen TV universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Jensen TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your jensen tv and also for your favorite remote control. Those methods are used for jensen tv remote control setup.

Conclusion:

If you found any of the above codes didn’t work for your device then try to enter the alternative codes which are mentioned above and still you face the same issue then leave a comment below about your issue and we will try to solve that issue and also provide you a best solution.

Leave a Comment