Grundig TV Universal Remote Codes & Program Instructions

If you need to control your Grundig tv with your favorite universal remote then you should have the tv remote codes list which can program your grunding tv remote and your favorite universal remote control. If you do not have them yet then this is the best platform to get them now.

In this blog we are giving all the remote control codes which are helpful to control your grunding tv and also the working methods too. So check them below and get your remote programed with the Grunding tv.

Grundig 7 in 1 Universal Remote Codes

0094, 0020, 0054, 0744, 0053, 0003, 0045, 0056, 0018, 0051, 0010, 1038, 0050, 0711

Grundig TV Universal Remote 4 Digit Codes

  • 0195
  • 0310
  • 1124
  • 0160
  • 1131
  • 0161
  • 0171
  • 1144
  • 0320

Grundig TV Universal Remote 3 Digit Codes

  • 113
  • 110
  • 128

Grundig Universal Remote Codes Philips

0003, 0026, 0027, 0046, 0073, 0113, 0115, 0155, 0191, 0192, 0193, 0194, 0223, 0226, 0230, 0242, 0265, 0711, 0737, 1009, 1011, 1017, 1024, 1033, 1034

How To Program Grundig TV Universal Remote?

If you would like to program Grundig multi-brand with remote codes for TV’s then once try the below method, if it won’t work for you just use the alternative methods which are mentioned below.

  • “Turn on” your tv and “Press & Hold” the tv key then “Enter codes” which are suitable for your brand
  • Your “TV Will Be Turned Off” when you enter the right code that means your set up have been completed.

Note: If your TV doesn’t turn off then repeat the procedure with other codes. Or else you can also check the alternative methods too.

How to Program Grundig TV Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Grundig TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Grundig TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Grundig TV Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

We hope the above methods and the codes have been worked to program your Grundig tv and also for your favorite remote control. Those methods are used for Grundig remote control setup.

Conclusion:

We are concluding with a note, if you need codes for your Grundig tv universal remote control then leave a comment below and we will update them whenever we find them. Thank you for visiting our website.

Speak Your Mind

*