Goldstar Tv’s Universal Remote Codes & Program Instructions

If you are using the goldstar tv then you need to use the below gold star tv universal remote control tv codes, these goldstar remote control codes can be programed with your gold star tv and will work perfectly. So why late just check the codes one by one and be programed with your tv and universal remote control so once try the below mentioned methods and connect the below codes as we mentioned in the methods.

Note: First try blue color codes from the below codes list if those codes not work then try remaining codes

Goldstar Tv’s Universal Remote Codes

  • 0003
  • 0004
  • 0043
  • 0080
  • 0153
  • 0270
  • 0280
  • 0299
  • 0590
  • 0592
  • 0498
  • 0501
  • 0333
  • 0393
  • 0395
  • 0172
  • 0252
  • 0269
  • 0399
  • 0400
  • 0476
  • 0477
  • 0481
  • 0482
  • 0410
  • 0414
  • 0486
  • 0528
  • 0544
  • 0579
  • 0581
  • 0513
  • 0518
  • 0599
  • 0600
  • 0624
  • 0641
  • 0663
  • 0697
  • 0752
  • 0794
  • 0673
  • 0677
  • 0678
  • 0694
  • 0409

Goldstar Tv’s Universal Remote Codes For RCA

  • 1004
  • 1005
  • 1006
  • 1012
  • 1019
  • 1056
  • 1057
  • 1058
  • 1082
  • 1155
  • 1156
  • 1171
  • 1172
  • 1196

GE & One-For-All Universal Remote Codes For Goldstar Tv

0004, 0009, 0005, 0227, 0338, 0012, 0057, 0080, 0156

Philips Universal Remote Codes For Goldstar Tv

0002, 0502, 0102, 0324, 0435, 0802, 0307, 0609, 0217

Magnavox Universal Remote Codes For Goldstar Tv

0017, 0028, 0067, 0073, 0076, 0085, 0086, 0087, 0088, 0089, 0090

How to Program Goldstar Tv Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Goldstar Tv Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Goldstar Tv universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Goldstar Tv Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your Goldstar tv and also for your favorite remote control.

Conclusion:

We have mentioned all the methods and also all the universal remote codes, just you need to enter the code as per the above mentioned methods and the device will be programed with the remote control.

If you have any queries then feel free to ask us and we will solve them as soon as possible.

Leave a Comment