Hello! are you using Tao Tronics Soundbar (tt-sk023, tt-sk017 and tt-sk15) ? or any other model and would you like to operate it with your favorite universal remote controls such as RCA universal remote or any other remotes then why late, in this blog we are mentioning some useful methods to easily program your favorite TaoTronics soundbar models such as tt-sk023, tt-sk017 and tt-sk15. Actually, these codes are not conventional remote codes, but if you programed correctly they will definitely work.
Note: If your universal remote control doesn’t work with it, you also have a chance to control it like a Bluetooth device by using your phone or tablet.
Basically, this TaoTronics sound bar use the wired connections which includes the LINE IN, Optical, Coaxial and also RCA IN. Each and every device can be connected by using the smartphone, tablet and also the other Bluetooth devices can easily be connected wirelessly too.
Contents
- 0.1 TaoTronics Soundbar Universal Remote Codes List
- 0.2 How To Connect TaoTronics Soundbar With Bluetooth Connection (Wireless)
- 1 How to Program Tao Tronics Soundbar Universal Remote Without Codes
- 2 How to Program Tao Tronics Soundbar Universal Remote With Manual Method
- 3 How to Program Tao Tronics Soundbar Universal Remote With Code Search
TaoTronics Soundbar Universal Remote Codes List
- 0XD9
- 0X14
- 1999
Actually, these codes do work on TaoTronics soundbar models 34 inch soundbar TT-SK15, 21 inch soundbar TT-SK017, and 36 inch soundbar TT-SK016.
How To Connect TaoTronics Soundbar With Bluetooth Connection (Wireless)
- First of all switch on the soundbar and then “Switch To Bluetooth Mode”
- Make sure Bluetooth to be activated on your device and also search for Bluetooth connections near by you.
- For IOS Devices: Settings > General > Bluetooth > ON
- For Android: Settings > Bluetooth > ON > Scan For Devices
- You need to select “Tao Tronics Soundbar” from the search results and then “Tap” to connect
- Then the Bluetooth indicator will be turned to the solid blue and also there will be a “Beep Sound”, it means your device have been connected successfully.
Some remotes can be programed with the devices by using the below mentioned methods, if the above method doesn’t work then try the below methods too.
How to Program Tao Tronics Soundbar Universal Remote Without Codes
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Tao Tronics Soundbar Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Tao Tronics Soundbar universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Tao Tronics Soundbar Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
We hope the above methods and the codes have been worked to program your Tao Tronics Soundbar and also for your favorite remote control. Those methods are used for Tao Tronics Soundbar remote control setup.
Conclusion:
If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site. Or do you need other remote codes then feel free to ask us through the below comment section and we will provide those codes for you.
