Blackweb DVD Player Universal Remote Codes

Are you looking for ways on how to simply the use of your home entertainment system? You can remove all the hassles and feel relaxed right at the comforts of your own home. Using the Blackweb DVD remote, you can take control several entertainment devices. Everything is possible with the use of universal Blackweb DVD remote codes. By entering the perfect code suited to your devices, you can operate them with only a single remote. With the complete list of codes we provide here, find the right one that perfectly matches your device and start programming it with Blackweb DVD remote.

Useful Links:

Blackweb DVD Universal Remote Codes List

All the Blackweb DVD codes we provide here correspond to the brand and model of the device you wish to program with Blackweb DVD universal remote.  The list of codes for Blackweb DVD universal remote will be used during the setup process. Never fear that you’ll run out of codes because we gather the complete list for the type and model of your device you wish to program. Check out the exact code you need from the list below.

BrandDVD Codes
BROKSONIC0394, 2103, 1780
EMERSON0456, 1877
FUNAI0456, 1877
INSIGNIA0456, 1877, 1406, 1408, 1135, 1407
JVC0923, 2342
MAGNAVOX1877, 0456
MEMOREX0394, 2103, 1780
PANASONIC0456, 0437, 2144, 2174, 0148
PHILIPS0204, 2081, 1975, 0456, 1877
SANSUI0394, 2103, 1780
SYLVANIA0456, 1877
SYMPHONIC0456, 1877
TOSHIBA0394, 0924, 2103, 2346, 1780

How to Program Blackweb DVD Universal Remote Codes

With only a few minutes, you can setup your device using the Blackweb DVD player codes. The instructions are easy to follow. You only have to take the step by step procedure to successfully program Blackweb DVD universal remote. Things can be easily done by yourself alone. Just make sure all the things you need like the device and remote are in good working condition.

Follow the instructions below on how to program Blackweb DVD universal remote codes:

How to Program Blackweb DVD Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Blackweb DVD Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Blackweb DVD universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Blackweb DVD Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.


How did you find the instructions provided in this article? Have you picked the right code you need? If you feel that this post have been a help, we want to hear your feedback. Tell us more about the exact code you entered that corresponds to which device. Your experience might be the same to other readers that could help them too.

Leave a Comment