Zenos Powerful TV Universal Remote Codes & Program Instructions

Are you using the Zenos Powerful TV and also searching for the universal remote codes to program with your tv then the below codes can be programed your remote with your tv, once try them now. If you find the perfect code then try the below methods which can make your tv programed with the any branded universal remote controls like ge, directv, comcast, cox..etc

Zenos Powerful TV Universal Remote 4 Digit Codes

  • 1756
  • 3851

Zenos Powerful TV Universal Remote 3 Digit Codes

  • 535
  • 387

Zenos Powerful TV Universal Remote 5 Digit Codes

  • 12434
  • 12049

How To Program Zenos Powerful TV Universal Remote?

Depending on the remote control which you have, the method to search for the code will be different, below is an example that may work with most popular remote controls.

The below method is helpful to search codes for your remote, if you couldn’t programed with the above codes then try this method.

How to Program Zenos Powerful TV Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Zenos Powerful TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Zenos Powerful TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Zenos Powerful TV Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

We hope the above methods and the codes have been worked to program your Zenos Powerful TV tv and also for your favorite remote control. Those methods are used for Zenos Powerful TV remote control setup.

Speak Your Mind

*