Are you trying to program Axess soundbar remote but facing a little difficulty? This article will answer everything you need to a successful setup process. All you need to have are the instructions and Axess soundbar player universal remote codes which we are going to discuss. Read through this post and end up with wonderful results for your ultimate home entertainment system experience! We have mentioned easy methods about how to enter the codes in your remote and setup with your soundbar so check the methods below along with the codes.
Axess Soundbar Universal Remote Codes List
The key to program your favorite remote and make it work with other devices is through the help of unique universal Axess soundbar remote codes. All the codes you might need are all here. Just take note of the brand and model of the device you want to program with Axess soundbar remote and find them here. Here is the list of the Axess soundbar universal remote codes you need:
How to Program Axess Soundbar Universal Remote
Sit back and relax while we provide you with the easy to follow steps on how to program Axess soundbar universal remote. You might not be needing the help of an expert technician to set up your device.
Follow the steps below to successfully program your device:
How to Program Axess Soundbar Universal Remote With Auto Search
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Axess Soundbar Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Axess Soundbar universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Axess Soundbar Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
We hope that this article have helped you in setting up your device. Tell us more about how this article has helped you. Your comments matter a lot in improving our site.