Toshiba Universal Remote Codes & Program Instructions

There are various types of universal remotes codes, but we are going to mention GE and also RCA Universal remote codes too but these are applicable to all types of remote controls. Try the codes which are mentioned below and get your Toshiba TV Programed with the Universal remote control.

In the below list you can get 3 digit, 4 digit and also five digit toshiba universal remote codes too.

TOSHIBA TV Universal Remote 4 Digit Codes:

  • 0983
  • 0260
  • 0398
  • 0973
  • 0394
  • 0924
  • 0156
  • 1191
  • 1121

TOSHIBA TV Universal Remote 3 Digit Codes:

013, 049, 089, 105, 109, 117, 118, 120, 159, 178

TOSHIBA TV Universal Remote 5 Digit Codes:

11524, 12724, 10156, 11935, 11704, 11959, 10650, 11343, 11369, 10060, 10154, 11265, 10036, 10149, 10736, 10832, 11656, 11156, 10822, 11256, 11936, 12006, 10093, 11945, 11918, 11743, 11356, 11325, 11306, 10845, 11635, 12667, 10003, 15969, 15532, 18943, 19443, 12134, 13504, 11916, 10856, 12305, 11210, 13115, 13517, 15412, 16219, 16921, 12109, 13403, 18206, 12615, 15716, 18016, 18418, 19114, 15355, 12294

RCA Universal Remote Codes For Toshiba TV

1000 , 1048 , 1049 , 1071 , 1072 , 1073 , 1105 , 1109 ,1117 , 1118 , 1160 , 1161 , 1162 , 1190 , 1201 , 1207 , 1256 , 1262 , 1282 ,1284 , 1287 , 1290 , 1356 , 1358 , 1374 , 1379 , 1380 , 1438 , 1451 , 1453 ,1455 , 1280

Magnavox Universal Remote Codes For Toshiba TV

0108, 0053, 0090, 0092, 0132, 0125

GE Universal Remote Codes For Toshiba TV

0394, 0181, 0117, 0012, 0109, 0105, 0141, 0159, 0178, 0120, 0095, 0170, 0049, 0358, 0924, 0260, 0095

Vivitar Universal Remote Codes For Toshiba TV

5199, 3031, 3475, 0053

Philips Universal Remote Codes For Toshiba TV

0313, 0111, 0437, 0715, 0041, 0419, 0719, 0613, 0627, 0111, 0112, 0094, 0618, 0517, 0506, 0512, 0802

How To Program A Toshiba TV Universal Remote

If you don’t know how to program toshiba tv with the universal remote then use the below mentioned methods and get started your toshiba tv by using the above mentioned universal remote codes.

How to Program Toshiba Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Toshiba Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Toshiba universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • ¬†Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Toshiba Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

Conclusion:

If you have got the better result with the above mentioned toshiba Tv universal remote codes then leave a feed back and support us by sharing this article with your families and also all other users who need this article help.

If you need help in finding the code which work with your toshiba tv then feel free to leave your query in the below comment section, we won’t ask any of your personal information. We will solve your issue as soon as possible.

Comments

  1. Gilbert Stewart says

    Hi, I cant get the direction up down left right to work in my huayu RML1328 REPLACEMENT CONTROL

    FOR MY toshiba smart tv 39L4353d

    Any help would be very much appreciated

Speak Your Mind

*