Telefunken TV Universal Remote Codes & Program Instructions

For Telefunken tv we have many universal remote codes, if you want to program your favorite remote control with your Telefunken tv then you should use the below codes either three digit codes or four digit codes you can check them below.

We are also providing the methods to program your remote control with your tv and you can check them now to program your device and also the remote. So why late get the codes and enter them now.

Telefunken TV Universal Remote 3 Digit Codes

067, 075, 098, 132, 133, 134, 135, 140, 185, 186, 231, 235

Telefunken TV Universal Remote 4 Digit Codes

1033, 1069, 1101, 0651, 1102, 1104, 1105, 1107, 1108, 1109, 1113, 1136, 1140, 1181, 1196, 1197, 1198, 1199, 1200, 1201, 1202, 1204, 1404, 1412, 1435, 1469, 1470, 1472, 1477, 1522, 1523, 1568, 1572, 1648, 1650, 1652, 1658, 1661, 1686, 1702, 1717, 1719, 1734, 1740, 1756, 1757, 1765, 1766, 1773, 1850, 1855, 1866

How To Program Telefunken TV Universal Remote?

  • “Turn on” your tv and “Press & Hold” the tv key then “Enter codes” which are suitable for your brand
  • Your “TV Will Be Turned Off” when you enter the right code that means your set up have been completed.

Note: If your TV doesn’t turn off then repeat the procedure with other codes. Or else you can also check the alternative methods too.

1) Keycode

By using the keycode we can easily program a Telefunken universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Telefunken TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Telefunken Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Telefunken universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your Telefunken tv and also for your favorite remote control. Those methods are used for Telefunken remote control setup.

Conclusion:

We are concluding with a note, if you need codes for your Telefunken tv universal remote control then leave a comment below and we will update them whenever we find them. Thank you for visiting our website.

Speak Your Mind

*