Are you having difficulty searching for the right Spectrum DVD universal remote codes? There is nothing to worry about because this article has all the codes and instructions to program Spectrum DVD remote with your favorite devices. You need to decide what audio or video device you wish to work with Spectrum DVD remote. We almost gather the complete list of DVD remote codes for Spectrum. By entering the perfect Spectrum DVD universal remote code, you are on your way to successfully program your device.
Contents
Spectrum DVD Universal Remote Codes List
Across any device, you will find from our list the exact code to program with Spectrum DVD universal remote. Alongside, also check the complete list of 4 digit Spectrum universal remote codes for DVD which you might need.
Find the exact code for the type of device you wish to work with Spectrum DVD universal remote:
Spectrum DVD Universal Remote Codes
| Brand Name | DVD Codes |
|---|---|
| LG | 350, 057, 074, 091 |
| Magnavox | 066, 096 |
| Panasonic | 144, 150, 285, 138, 042 |
| Philips | 066, 276, 317, 344 |
| RCA | 027, 307 |
| Samsung | 070, 380, 275, 165, 159, 137 |
| Sony | 033, 241, 378, 242, 191, 001, 363, 286, 243, 340, 368, 343, 351, 145 |
| Toshiba: | 035, 356, 164, 141, 273, 130, 188 |
Spectrum DVD/Blu-Ray Universal Remote Codes
| Brand Name | DVD/Blu-Ray Codes |
|---|---|
| Denon | 329 |
| Panasonic | 346, 285 |
| Philips | 344 |
| Pioneer | 304 |
| Samsung | 275 |
| Sony | 340, 286 |
| Toshiba | 273 |
How to Program Spectrum DVD Universal Remote
There are steps you need to follow if you desire to control multiple devices using the Spectrum DVD universal remote. As mentioned above, DVD remote codes for Spectrum play a crucial role during the programming.
Follow carefully the steps provided below to successfully program Spectrum DVD universal remote:
How to Program Spectrum DVD Universal Remote Without Codes
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Spectrum DVD Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Spectrum DVD universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Spectrum DVD Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
Conclusion
If you are having difficulty using any of the codes above, we are updating the list everytime there are new ones available. Or please message us if you have found the right code for the preferred device you wish to program with Spectrum universal remote. Feel free to leave your comment below.
