Sharp Aquos Blu-Ray Player Universal Remote Codes & Program Instructions

We have mentioned all types of Sharp Aquos Blu-Ray Player Universal Remote Codes, if you need those codes then check them from the below lines we have mentioned 3 digit and also 4 digit codes, so once check them from the below lines and get your blu-ray programed with the universal remote control.

If you find any of the codes do not work on your remote control, then let us know through the below comment section, we will give some suggestions about the codes. So feel free to ask us and get the solutions as soon as possible.

Sharp Aquos Blu-Ray Player 3 Digit Universal Remote Codes

206, 207, 222, 226, 227, 234, 239, 242, 246, 248, 254, 266, 268, 273, 274, 275, 280, 285, 287, 300, 340, 341, 360, 361

Sharp Aquos Blu-Ray Player 4 Digit Universal Remote Codes

2250, 0679, 0689, 0397, 0897, 0908

How To Program Sharp Aquos Blu-Ray Player Universal Remote?

1) Keycode

By using the keycode we can easily program a Sharp Aquos Blu-Ray Player universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Sharp Aquos Blu-Ray Player Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Sharp Aquos Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Sharp Aquos Blu-Ray Player universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your Sharp Aquos Blu-Ray Player and also for your favorite remote control. Those methods are used for Sharp Aquos Blu-Ray Player remote control setup.


If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site.

Speak Your Mind