Finding relaxation from watching shows or listening to music is what everyone does especially to end up a very hectic and long day. To make your relaxation extra comfortable, try using one remote to control a number of devices in your room. If Honeywell TV remote is more convenient to use, then all you need are codes to program each preferred device. The Honeywell TV universal remote codes will be used to setup the device and work with your remote.
Contents
Honeywell TV Universal Remote Codes List
One of the keys to successfully program Honeywell TV universal remote is the specific code for the brand and model of your device. From our extensive list of Honeywell TV codes, find one that best match to your preferred device:
Honeywell TV Universal Remote Codes List
- 11758
- 0028
- 0027
- 0021
- 0000
GE & Philips and One-For-All Universal Remote Codes For Honeywell TV
- 6141
How To Program Honeywell TV Universal Remote
The process involves to program the Honeywell TV remote is very simple. You only have to follow the given instructions and take the steps one by one. Just take note of the unique Honeywell TV codes you need during the procedure. Once the setup is successful, you will fully enjoy the advantage of using Honeywell TV remote to control your other devices. Below are the instructions you need to follow:
How to Program Honeywell TV Universal Remote Without Codes
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Honeywell TV Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Honeywell TV universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Honeywell TV Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
Conclusion
Have we helped you in programming your Honeywell TV remote using the above given codes? We wish to hear your experience with us. Please leave a message on the comment box provided below.
