Chunghop Universal Remote Codes & Program Instructions

There are plenty of universal remote codes for your favorite Chunghop universal tv, we have mentioned all the codes for most usable tv’s with this chunghop remote rm-88e, rm-133e and other remotes we can operate our favorite tv like samsung, aiwa, sanyo and so on.. we mentioned all types of codes like three digit, four digit, and also five digit too.

First of all check the codes and then enter them as per the below mentioned methods.

Chunghop Universal Remote Codes List

Hisense: 676, 677, 707, 898
LG: 024, 040, 098
JVC: 089, 161, 909
All Other Brands: 036, 044, 057, 073
Sharp: 003, 018, 016
Sanyo: 063, 064, 065, 066
Panasonic: 020, 001, 002
Sony: 041, 049, 005
Aiwa: 009, 057, 058
Samsung: 618, 619, 620, 621
Philips: 013, 023, 024
TCL: 051, 053, 068

How To Program Chunghop TV Universal Remote?

There are three different methods to program Chunghop tv universal remote either it could be ge universal remote or it could be any other popular remote control but the methods are same.

1) Keycode

By using the keycode we can easily program a Chunghop universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Chunghop TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Chunghop Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Chunghop universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your Chunghop tv and also for your favorite remote control.

Conclusion:

If you have any queries about the universal remote codes then leave your query in the below comment section we will find a solution to that and let you know the answer soon too. Be free to inform us about your query.

Speak Your Mind

*