Zenith Universal Remote Codes & Program Instructions

Hey! universal remote controls folks! here we’ve come with the latest codes of Zenith Universal Remote. We provided each and every code you can check them below. If you do not know to program this remote control then we dropped the best methods too. Simply, check them below and then enter the codes as per that procedure.

Zenith Universal Remote Codes List

These Zenith Codes worked for many users first try these then try below codes: 101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521

Brand NameRemote Code
Craig805, 906
Daewoo002, 102, 110, 203, 214, 221, 303, 311, 314
Emerson002, 003, 004, 005, 006, 014, 104, 105
Fisher506, 606, 619, 902
Fujitsu206
Funai206, 805, 906
GE002, 007, 018, 107, 310, 318, 502, 601, 719, 803
Goldstar002, 102, 117, 207, 217, 307, 502, 713, 818, 916
Hitachi002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619
JVC007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902
Magnavox002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510
Memorex102, 502, 506, 601, 701
Mitsubishi002, 102, 114, 206, 502, 509, 510, 619, 709, 803
Panasonic017, 516, 618, 807, 901
Philips002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508
Proscan601, 719
RCA002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514
Samsung002, 102, 103, 112, 212, 502, 512, 702, 818, 908
Sansui215
Sanyo002, 312, 412, 506, 619, 902
Sharp002, 013, 111, 502, 712, 812, 813, 918
Sony202, 801
Sylvania002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717
Symphonic117, 520, 904, 906
Toshiba112, 313, 413, 506, 510, 512, 902
Zenith008, 117, 311, 405, 407, 512, 601, 701, 713, 916

How to Program Zenith Universal Remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Zenith Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Zenith Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Zenith Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.

Conclusion:

In this blog post we have mentioned each and every Universal Remote Codes for Zenith, still if you have any issues about the above universal remote codes or if we skipped to mention some codes then leave a comment we will rectify the faults and also we will mention those Zenith remote codes.

Speak Your Mind

*