Singer TV Universal Remote Codes & Program Instructions

by

Searching for the Singer TV Universal Remote Codes is not very difficult task. Just for your android devices, here you will get the you will get the remote. Once, when you programmed with the correct code for the Singer TV then your TV will work with your universal remote.

So make sure that you should undergo the process of the remote codes. Now you can take the full advance of the remote by just using this remote on your various devices. Even you will also find your TV of every brand.

4 Digit Singer TV Universal Remote Codes

0037, 1556, 0556, 0806, 0698, 0335, 0009, 0163, 0087, 0114, 0064, 0129, 0036, 0362, 0119, 0398, 0462, 1564, 5021, 5024

3 Digit Singer TV Universal Remote Codes

114

5 Digit Singer TV Universal Remote Codes

10508, 13001, 19405, 16915, 10125, 11922, 12020, 15526, 15722, 15820, 16124, 17921, 16032, 18832, 16440

How to Program Singer TV Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Singer TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Singer TV universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Singer TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

At the end of the informative article, now you can easily apply the universal codes on your android device with the help of the remote. So now I would like to suggest you, without wasting the time just apply the above procedure just to get the universal codes. So hurry up and if you have any issue regarding this article then let us know. We will solve your problem.

Leave a Comment