Senzu TV Universal Remote Codes & Program Instructions

From the below lines we have mentioned all the useful universal remote codes which are eligible for different branded remote controls like GE, Directv, and so on. If you want to operate your tv you need to use the below codes by following the methods which are going to show after the codes.

Then why late just program your tv with the remote control and enjoy your streaming. If you observe that any of the below methods or below codes could not worked for you then change the code and try again your remote will get programed.

Senzu TV Universal Remote 3 Digit Codes

201, 205, 000, 297, 257

Senzu TV Universal Remote 4 Digit Codes

0178, 0030

Senzu TV Universal Remote 5 Digit Codes

12493

How To Program Senzu TV Universal Remote?

There are three different methods to operate any universal remote control by programing with your tv, if you program with working codes by using the below methods then your tv will be working fine! so let us have a look at the methods if you have the codes from the above list of codes.

1) Keycode

By using the keycode we can easily program a Senzu TV universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Senzu TV Universal Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Senzu TV Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Senzu TV universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

We hope the above methods and the codes have been worked to program your Senzu TV and also for your favorite remote control. Those methods are used for Senzu TV remote control setup.

Conclusion:

If you found any of the above codes didn’t work for your device then try to enter the alternative codes which are mentioned above and still you face the same issue then leave a comment below about your issue and we will try to solve that issue and also provide you a best solution.

Speak Your Mind

*