Sceptre TV Universal Remote Codes & Program Instructions

by

If you are searching for the Sceptre TV’s Universal remote codes then we are mentioning the working codes for any brand such as magnavox, RCA, GE etc. and you can program your device with the universal remote by using the below codes which are mentioned in the below list.

You can use the three methods to program your tv by using the sceptre tv codes, if any of those won’t work then use the another code from the bunch of list.

  • 11360
  • 11217
  • 10878
  • 11599
  • 10000

Sceptre TV’s 4 Digit Universal Remote Codes

  • 0991
  • 0000
  • 0080

Sceptre TV’s 5 Digit Universal Remote Codes

  • 10878
  • 10000
  • 11360
  • 11217
  • 11599

if these 3 codes not work try below once

2337, 3899, 4886, 2528, 4139, 0149, 1132, 3521, 4071, 5111, 0878, 1217, 1360, 1599, 2506, 1392, 1467, 1365, 1167, 1318, 1814, 0516, 5260, 5367

Sceptre TV’s 3 Digit Universal Remote Codes

500, 677, 781, 640, 654, 159, 246, 207, 674, 908, 641, 837, 552, 064, 279, 086

GE Universal Remote Codes For Sceptre TV

1167, 1132, 0149, 5260, 5367, 3521, 4071, 5111, 3521, 4071, 5111, 3521, 4071, 5111

RCA Universal Remote Codes For Sceptre TV

11217, 1360, 3899, 12528, 0878, 12506, 1599, 11599, 11360, 13899, 2528, 12337, 1217, 2337, 14139, 2506

Sceptre TV Codes For Xfinity Remote

  • 11360
  • 11217
  • 10878
  • 11599
  • 10000

How to Program Sceptre TV Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Sceptre TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Sceptre TV universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Sceptre TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

With the above three methods we can easily Program Our SCEPTRE TV’s  Device Universal Remote.

Conclusion:

Above mentoned three methods are very helpful to program your universal remote with the SCEPTRE TV Device and you need to select codes one by one until your device will be connected to the remote control.

Leave a Comment