Coolux Universal Remote Codes & Program Instructions

Are you looking for codes to program Coolux TV Universal remote? This article will help find what you need. We have all the Coolux TV universal remote codes along with the instructions to guide you on how to setup the device you preferred programming. The Coolux TV remote is the coolest thing you could grab in your living room and make it work with numerous devices! You can use coolux remote manual method or the other remaining methods too so check out the processes along with the codes.

Coolux Universal Remote User Manual

Now that you have the idea on how to program your device with remote codes Coolux tv, find the specific code that matches the brand and model of your preferred device. Each code corresponds to a particular device so you must be careful in choosing the right one. Below is the complete list of Coolux TV universal remote codes:

Note: There is no code required to use coolux remote you just need to follow below simple steps for any brand

  1. Press “EST” Button on Coolux Remote for 6 seconds
  2. Then you will see “indicator lamp light”
  3. If you see volume symbol on your tv then Click on “SET” Button
  4. If not Try  this method again

How to Program Coolux Universal Remote

If you tired of being confused from using a lot of remote cluttering in your room, try using a single one and see the difference. With the help of Coolux remote codes, you can make it control numerous devices by simply programming with the chosen device. We will be guiding you all throughout the set up process you stay relaxed. Here are the steps to program Coolux TV universal remote:

How to Program Coolux Universal Remote With Auto Search

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Coolux Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Coolux universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Coolux Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.


Do you know other codes which will work with Coolux tv remote? You can share those codes here and we will post them as reference to other readers. We welcome your suggestions and comments to help improve this site and help other visitors as well.


Leave a Comment