Have you brought a new universal remote control for your Axess TV and don’t you have knowledge about the remote codes then here is the best guide to program your tv with the universal remote control by using some codes such as three digit codes, four digit codes and also five digit codes too.
We have all types of codes such as axess tv remote code 5 digit to program remote control and tv together, you can try the remote codes from the below mentioned list according the given methods. Suppose one code doesn’t work for you then try with another codes, so keep on trying until your remote control get programed with your tv.
- 1 How To Program Axess TV Universal Remote?
- 2 How to Program Axess TV Universal Remote Without Codes
- 3 How to Program Axess TV Universal Remote With Manual Method
- 4 How to Program Axess TV Universal Remote With Code Search
Axess TV Universal Remote 4 Digit Codes List
Axess TV Universal Remote 3 Digit Codes List
How To Program Axess TV Universal Remote?
Actually, the procedure to Search For Your Axess TV Remote Code varies from brand to brand. Here we are providing the procedure to search the codes for your axess tv then try this method once, if it doesn’t work for your tv then try the alternative methods below.
- Simply press the “TV Button” and then “Release”
- Now keep on pressing and holding the button and after few seconds the “Red LED Flashes Twice”, so you can release now.
- Now “enter three digit code (9-9-1)” (On your remote you can see two blinks)
- Then slowly press the “Power TV” and also “Device Tv” buttons until the device will be “Turned Off”
- You have to make sure during the search “the remote should be pointed at your device”
- Now you may need to press this sequences of buttons for multiple times for searching the entire “library of codes”
- Whenever your tv will be turned off, you need to “Press” the “setup button” and then release it to lock in the code for your tv.
If you find it is not helpful to program then use the below methods they might help you.
How to Program Axess TV Universal Remote Without Codes
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
- “Switch On” the smart device like “TV” that you want the universal remote to operate.
- “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
- Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
- Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
- Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.
How to Program Axess TV Universal Remote With Manual Method
By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.
- First you need to “Turn The Device On”
- Press the “TV” on your “Axess TV universal remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
- Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.
How to Program Axess TV Universal Remote With Code Search
If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.
We hope the above methods and the codes have been worked to program your Axess tv and also for your favorite remote control. Those methods are used for Axess remote control setup.
If you feel good about this article then please give us a feedback, it will give us a boost up to improve our site and to reach many aspirants those who are waiting for their remote codes, we also accept new universal remote control codes those are working for you, please leave those codes in the below comment section we will forward them to the other users too by posting them in our site. Or do you need other remote codes then feel free to ask us through the below comment section and we will provide those codes for you.