Akira TV Universal Remote Codes & Program Instructions

Akira TV has various types of branded universal remote controls and if you are using any of those remotes or if you’re using akira tv and wants to set up with the universal remote you need to have the codes the codes are might be two digit codes, three digit codes or four digit codes you can get them from the below table and set up your akira tv remote with your favorite branded universal remote.

In this blog post we have mentioned all the universal remote codes for akira tv and also three methods are provided in the below lines if you don’t know how to set up any branded universal remote control with your TV then follow them and try various codes until your tv remote programmed with the universal remote.

Akira TV Universal 3 Digit Remote Codes

211, 611, 350, 381, 384

Akira TV Universal 4 Digit Remote Codes

2530, 0037, 2241, 0753, 0418, 3480, 4226, 2457, 0079

How To Program A Akira Tv Universal Remote?

There are three simple ways to setup or to configure a universal remote and the first one is Using a Keycode, Programming Via universal remote code for Akira Tv Search and Manual Setup.

1) Keycode

By using the keycode we can easily program a Akira universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Universal Akira Remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Akira Remote Code

If you couldn’t find the key code which works for the device at that time you can setup your Akira universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

Speak Your Mind