Sylvania Soundbar Universal Remote Codes

Would you like to operate your Sylvania Soundbar by using the universal remote control ? or with cable remote, SAT remote then we have all types of remote codes which can make it work. If you programed with correct procedure then it can be worked properly by using any type of remote control.

You can check the various types of methods below and also working codes. So just try each code until your soundbar programed with your favorite universal remote control.

First Try these codes:

  • 4068
  • 30797
  • 0054
  • 0030
  • 0020
  • 0096

Sylvania Soundbar Universal Remote 4 Digit Codes

0030, 0002, 5018, 5309, 1665, 1056, 5151, 1886, 0701, 1128, 1059, 5014, 5001, 1082, 1483, 5205, 1279, 0502, 1132, 5285, 0068, 1060, 0054, 5155, 1051, 1006, 0919, 0321, 1165, 1134, 0171, 1028, 1196, 0807, 0096, 1059, 1199, 1102, 0008, 1334, 1074

Sylvania Soundbar Universal Remote 5 Digit Codes

10005, 13700, 13207, 11665, 18212, 12284, 17464, 19617, 11931, 11314, 13811, 12270, 13811, 11864, 17627, 12270, 10171, 10028, 17342, 10065, 10030

Sylvania Soundbar Universal Remote 3 Digit Codes

699, 004, 559, 598, 353, 134, 006, 035, 160, 173, 621, 694, 666, 196, 712, 020, 723, 030, 567, 027, 699, 060, 019, 127, 668, 632, 353, 011, 621, 068, 074, 164, 010, 456, 007

You can even try code search method we mentioned below and simply follow that procedure.

How To Program Sylvania Soundbar Universal Remote:

Code Search using Comcast Remote Control:

  1. Make sure “Turn On” Soundbar
  2. Now hit once on “Aux”
  3. On “Setup” button hold on by pressing it until “Key Blinks Twice”
  4. Then “Release Setup”
  5. Enter the code with “9 9 1 3” or “9 9 3”
  6. If you entered correct code then “Aux Key” will blink twice
  7. After that hit on “Power” and then target your remote control to soundbar
  8. Now press “CH+” until your soundbar will get “turned off”
  9. Now the remote control send “IR Codes” from the library to the device which you’ve chosen
  10. Once it has done then press “Lock in the code”
  11. If everything is correct then “Aux Key Will Blink”

Code Search using DIRECTV Remote Control:

  1. “Switch On” Soundbar
  2. Press “Vol+” but it should be “Muted”
  3. Now hit on “AV1” or “AV2”
  4. Now Hold on press “Mute” and “Select” buttons up to 2 blinks
  5. Then enter code “9 9 1” and then wait for 2 blinks
  6. Now Enter “3”
  7. Now press “VOL+” for a second and then release
  8. Aim your remote to soundbar and then keep on pressing and releasing the “CH UP” key
  9. If the “Volume Changes” then press “Select” it will lock the code.

By using the above code search methods we can not only find the codes for Comcast and direct tv but also we can find with any of our favorite universal remote controls. So don’t hesitate to try this method with your favorite remote.

Note: We have some more methods to program your remote control with the sylvania soundbar. You can also use them too and the methods mentioned below.

How to Program Sylvania Soundbar universal remote With Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Sylvania Soundbar universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Sylvania Soundbar universal remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

How to Program Sylvania Soundbar Universal Remote With Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace”
  •  Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • Then press And hold the corresponding key on the “Original Remote Controller”
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session.


If you need any assistance from us regarding to any kind of universal remote codes then please contact us and we will give a better suggestion and resolve your issue as soon as possible. Keep visiting to get more update universal remote codes.

Speak Your Mind