Craig TV’s Universal Remote Codes & Program Instructions

by

Are you looking forward to get the craig tv universal remote codes, then here is the end to your searching, from this blog post we are going to mention all the universal remote codes for craig’s soundbar, so why late just check the below list and there you will get all types of codes such as 2 digit, three digit and also four digit, five digit codes too.

We are also providing some methods to program your favorite universal remote control with this craig tv, after find the steps to program then use the codes to enter to program as per the methods. Let us check the procedure too.

Craig TV’s Universal Remote 4 Digit Codes List

00073, 6222, 06222, 10180, 0073, 10073, 16222, 11822

Craig TV’s Universal Remote 3 Digit Codes List

541, 536, 691, 662, 666, 667, 682, 009, 657, 669, 694, 532, 542, 533, 963, 038, 042, 053, 037, 161, 180, 282, 171, 064, 038, 064, 009

Craig TV’s Universal Remote 5 Digit Codes List

10180, 13423, 10161, 19411, 11922

Universal Remote Code For Craig Soundbar

00161

RCA Universal Remote Codes For Craig TV

  • 1038

GE & One-For-All Universal Remote Codes For Craig TV

  • 0053
  • 0042

Philips Universal Remote Codes For Craig TV

  • 0906
  • 0805

Magnavox Universal Remote Codes For Craig TV

  • 0044
  • 0052

How to Program Craig TV Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program Craig TV Universal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “Craig TV universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  •  Finally enter the “Keycode” which you collected from the programing guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program Craig TV Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

We hope the above methods and the codes have been worked to program your Craig tv and also for your favorite remote control.

Conclusion:

First of all you have to confirm your brand name of your remote control and then try all the universal remote codes which are mentioned in the above list one by one, you can use the methods to program your remote control too, so why late start with any code until you get paired with your craig tv.

If you have any queries then feel free to ask us and also get the instant reply.

Leave a Comment